Are you looking for a fun and practical project that benefits local wildlife? Consider making your own deer feeder! With these 25 homemade DIY deer feeder ideas and plans, you can learn to build a feeder that suits your specific needs. From gravity feeders to hanging designs, each DIY design comes complete with material lists and clear visual illustrations to help you assemble your feeder with ease.
Building your own deer feeder is a great way to contribute to wildlife conservation and make a difference in your local ecosystem. With a variety of homemade protein feeder ideas, ranging from simple five-gallon designs to more advanced plans, you can craft a unique and effective feeding solution that reflects your personal touch and dedication to nature. Explore these exciting deer feeder ideas and start your next project today!
Deer Feeder Building Plan
Building a deer feeder can be a fun and rewarding project for any outdoor enthusiast. With this deer feeder building plan, you can create a sturdy and long-lasting feeder for less than $100. The materials needed for this plan include 4×4 treated lumber, 2×4 treated lumber, 1×6 sawmill, and 1×8 cedar. The construction process takes just seven days to complete, and the end result is a high-quality deer feeder that can provide food for years to come.
To make this deer feeder, follow these simple instructions:
- Cut the 4×4 treated lumber into four 8-foot pieces for the legs.
- Cut the 2×4 treated lumber into eight 2-foot pieces for the frame.
- Cut the 1×6 sawmill into eight 2-foot pieces for the sides.
- Cut the 1×8 cedar into four 2-foot pieces for the roof.
- Assemble the frame by attaching the 2-foot pieces to the legs.
- Attach the sides to the frame using screws.
- Attach the roof to the sides using hinges.
- Fill the feeder with corn or other food, and enjoy watching the deer come to feed.
With this easy-to-follow plan, you can create a unique outdoor experience for your family or hunting buddies. So why wait? Get started today and build your own deer feeder!
How to Build a Deer Feeder
Building a deer feeder is a simple and affordable way to attract wildlife to your backyard. To build your own feeder, you will need a four-inch diameter PVC pipe, a PVC wye that fits the width of the pipe, grates, a lid, and straps, ropes, or wires. Follow these easy steps to create your customized deer feeder:
- Cut the PVC pipe to your desired length, keeping in mind the amount of feed you want to hold.
- Attach the PVC wye to the bottom of the pipe, making sure it is secure.
- Install grates on the sides of the pipe, allowing the deer to access the feed.
- Attach the lid to the top of the pipe, ensuring it is sturdy and secure.
- Use straps, ropes, or wires to hang the feeder in a safe location.
This DIY project is perfect for beginners and allows you to observe these majestic animals without leaving your backyard. By following these simple steps, you can create a deer feeder that will attract plenty of friendly wildlife to your yard.
Make Your Own Deer Feeder
Looking to save some money and have control over what goes into your deer feeder? With just a few supplies, you can easily make your own deer feeder. This project requires 6 inches of PVC pipe, 2×4 treated boards, 1×8 white wood, PVC pipe caps, orange marking paint, and assorted spray paints. By making your own deer feeder, you can provide a steady food source for local deer while enjoying your time outdoors. Plus, you can customize the feeder to your liking and avoid spending money on unnecessary bells and whistles.
Making a Deer Feeder Out of Wood
Building a deer feeder out of wood is a simple and rewarding project that can attract deer to your backyard. To get started, head to your local home center or lumber yard and pick up some pine or cedar boards. You will only need two boards for this project.
The feeder consists of a wooden box with a bin for storing food. The front panel of the box is diagonal, creating a narrow opening that allows only small amounts of food to come out at once. This design ensures that the deer will come back to the feeder again and again once they find a reliable source of food in their territory.
To make your own deer feeder, follow these step-by-step instructions:
- Cut the boards to the desired length and width using a saw.
- Assemble the box using wood glue and screws.
- Attach the front panel at a diagonal angle, creating a narrow opening.
- Add a hinged roof to the top of the box for easy access to refill the food bin.
- Mount the feeder on a sturdy post or tree in a location that is easily accessible to deer.
With these simple steps, you can create a homemade deer feeder that will attract deer to your backyard and provide them with a reliable source of food.
Inexpensive DIY Deer Feeder
Looking for an affordable and easy way to attract deer to your backyard? Look no further than a homemade deer feeder made from PVC pipe and basic tools. By using durable materials, you can ensure that your feeder will last for years to come and provide a reliable food source for your forest friends. With just a few simple steps, you can construct a feeder that is both effective and long-lasting. So why wait? Start building your own DIY deer feeder today and experience the beauty of nature in your own backyard.
Homemade Deer Feeder
If you’re looking for a simple and effective way to help wildlife while preparing for hunting season, consider building a DIY feed bandit feed testing trough. This feeder is made from 2×8 treated lumber, mesh screen, and black spray paint. Its easy-to-build design makes it a great project for any DIY enthusiast looking to make a difference in their outdoor space. With the feed bandit, you can confidently offer a nutritious food source for animals, knowing that it’s designed to minimize mess and waste. Plus, it’s a great way to attract deer to a specific area for hunting purposes.
Easy DIY Deer Feeder
Building your own deer feeder is a great way to attract wildlife to your backyard. With a steel drum, three legs, a motor, a timer, and a battery, you can create a simple and effective deer feeder. Follow these easy steps to construct your own DIY deer feeder:
- Cut a hole in the bottom of the steel drum for the motor to fit through.
- Attach the motor to the bottom of the drum, making sure it is secure.
- Install the timer and battery near the motor.
- Attach the legs to the drum, making sure they are sturdy.
- Fill the drum with corn or other feed.
- Set the timer to dispense the feed at the desired intervals.
With these simple instructions, you can create a deer feeder that will attract all sorts of wildlife to your backyard. Enjoy the sights of deer and other animals feeding in your own backyard with your newly constructed DIY deer feeder!
Make a Deer Feeder Using PVC Pipes
If you’re looking for a budget-friendly way to attract deer to your property, building a DIY deer feeder using PVC pipes is an excellent option. With these homemade deer feeder plans, you can easily construct a feeder that is not only affordable but also customizable to your liking. Here are the simple step-by-step instructions to help you build your deer feeder from scratch:
- Gather all the necessary materials, including PVC pipes, end caps, elbows, T-joints, screws, and a drill.
- Cut the PVC pipes into the desired lengths and assemble them using the T-joints, elbows, and end caps.
- Drill holes in the bottom of the feeder to allow for drainage.
- Attach the feeder to a sturdy post or tree using screws.
- Fill the feeder with deer feed and wait for the deer to come.
Building your own deer feeder is a cost-effective way to attract deer to your property and customize the feeder to your liking. Plus, you’ll save money by avoiding expensive store-bought options that may not offer the same quality or customization. Get creative and make something unique today with these homemade deer feeder plans!
Build a Gravity Deer Feeder on the Cheap
Looking for a budget-friendly way to feed deer and other wildlife? Consider building a DIY gravity deer feeder using sewer drain PVC pipe, a 45-degree PVC sewer drain wye, a grate, solvent fittings, and PVC cement and primer. This sturdy and discrete feeder can be strapped to a tree and provides nutrition to wildlife in a pressured area without disturbing the natural environment. It’s perfect for bridging the gap between growing seasons or as part of a food plot strategy. Follow these step-by-step instructions to cut, attach, and strap the feeder to a tree in no time. With this DIY automatic deer feeder, you can help ensure that wildlife in your area stay healthy and well-fed.
Inexpensive DIY Durable Deer Feeder
Attracting deer to your backyard is easy with an inexpensive and durable DIY deer feeder. To build one, start by collecting a wooden pallet, a 1-inch thick treated plywood sheet, and a metal garbage can. Spray paint the entire structure with brown-green stripes for camouflage. Secure the parts with screws or large nails and attach the lid to the top of your homemade deer feeder. This affordable and strong deer feeder will last for years, and you can enjoy watching deer visit your backyard. Follow these simple steps to build your own deer feeder and attract wildlife to your yard.
DIY Deer Feeder Woodworking Project
Looking for a way to feed wild animals without disrupting their natural habitat? Look no further than this DIY deer feeder woodworking project! With just a week’s worth of work and some basic lumber pieces, you can create a simple yet effective feeder that will allow you to observe nature from a distance. This design is perfect for those who want to provide food for animals while still protecting them. Using 4×4, 2×2, 2×4, and 2×6 lumber pieces and ¾” plywood, you can build a feeder that will last for years to come.
DIY Deer Feeder Using 4 Corrugated and PVC Pipe
Creating your own deer feeder is an easy and affordable solution for outdoor enthusiasts who want to attract wildlife without breaking the bank. This DIY project requires only 4″ corrugated PVC pipe, which can be sourced from old pipes around your home. Follow these simple steps to construct your own deer feeder:
- Cut the PVC pipe into four 2-foot sections.
- Drill small holes into the bottom of each pipe section for drainage.
- Connect the four sections using PVC connectors to form a square.
- Cut a section of corrugated pipe to use as the feeder tube.
- Attach the feeder tube to the top of the PVC square using zip ties.
- Fill the feeder tube with deer feed and enjoy watching the wildlife visit your new feeder.
This DIY deer feeder is an affordable and easy way to attract wildlife to your backyard. With just a few simple steps, you can create a feeder that will provide hours of entertainment for you and your family.
Homemade Deer Feeder Using PVC
Looking for an affordable way to feed hungry deer and help nature out? This DIY project is perfect for you! With just a few budget-friendly materials under $50, you can easily set up a homemade deer feeder using PVC piping, primer, and cement. Simply cut the PVC into your desired shape, clean and prime it, then attach the fitting parts with cement. Mount it up in a safe place, and you’ll be able to start feeding hungry deer immediately. This is a great solution for anyone looking to keep animals fed without breaking the bank.
Easy and Affordable Deer Feeder Setup
Make your outdoor space more inviting with an easy and affordable DIY deer feeder. This simple and budget-friendly setup provides a safe and comfortable environment for deer. With just $8, you can make a deer feeder that can hold up to 30 lbs of corn, enough to keep them coming back for more. An auto-fill mechanism ensures that the feeder is always full, so you don’t have to worry about running out of food. This easy and cheap deer feeder setup is a great way to ensure that your local deer population always has plenty to eat.
DIY Deer Corn Feeder for Hunting
Looking for a simple and effective way to attract deer to your hunting area? Try making your own DIY deer corn feeder from PVC pipe. This feeder is easy to make, inexpensive and can be made with scrap materials in less than 10 minutes.
To make your deer feeder, simply strap the PVC pipe to a tree or post with the bottom about an inch above the ground. Fill the pipe with corn and cap the top to keep water out. As deer eat the corn from the bottom, more will spill out through the gap.
This DIY deer feeder is a great alternative to traditional deer feeders, and it’s also very effective. Plus, it’s much cheaper and can be customized to your liking. However, before using it, make sure to check local laws to ensure it’s legal in your area.
Here are some key benefits of making your own DIY deer corn feeder:
- Simple to make with scrap materials
- Inexpensive compared to traditional deer feeders
- Can be customized to your liking
- Effective in attracting deer to your hunting area
In summary, making your own DIY deer corn feeder is a great way to attract deer to your hunting area. It’s simple, effective and can be made with scrap materials in less than 10 minutes. Just make sure to check local laws before using it.
Build Your Own Deer Feeder
If you want to feed deer in your area without spending too much money, building your own deer feeder is a great option. Fortunately, you can create a simple and affordable deer feeder using materials you already have at home. With a few materials like lumber 2×4 or 2×6, a barrel with lid, and pvc clean-out pieces, you can build your deer feeder in just 20-30 minutes. This DIY deer feeder is strong enough to hold plenty of feed without breaking the bank. By building your own deer feeder, you can ensure that wildlife is getting all they need while saving money at the same time. Start building your own deer feeder today!
Homemade Five Gallon Deer Feeder
Looking for an easy and affordable way to attract deer to your hunting area? Look no further than a homemade five-gallon deer feeder! With just a few simple materials, you can create an effective feeder that will keep wildlife coming back for more. Here’s what you’ll need:
- A five-gallon bucket with a lid
- Binder twine or rope
- One 3-foot dowel rod
- Deer feed
To assemble your feeder, simply drill a hole in the bottom of the bucket and insert the dowel rod. Tie the binder twine or rope to the dowel rod and hang the feeder from a tree or other sturdy object. Fill the bucket with deer feed and you’re ready to go!
This DIY deer feeder is not only easy to make, but it’s also cost-effective compared to bulkier commercial options. Plus, it’s a great way to attract wildlife to your hunting area and increase your chances of a successful hunt. Give it a try and see the results for yourself!
How to Make a Deer Feeder
Making a deer feeder is a quick and easy project that can be done in just 10 minutes. To get started, gather the following materials: 2-inch diameter PVC pipe, metal wire, rope or string, two 2-inch PVC pipe caps, a marker, and horse feed or corn.
First, attach the PVC pipe caps to a tree or post using the metal wire or rope. Next, drill small holes into the PVC pipe using the marker. Fill the pipe with horse feed or corn, and then hang it up using the wire or rope.
This simple and affordable project can be used as an effective animal food dispenser for deer and other animals. By creating your own custom-made deer feeder, you can save time and money while providing a reliable food source for wildlife.
How to Make a PVC Pipe Deer Feeder
If you’re looking for an affordable and easy DIY deer feeder, look no further than a PVC pipe feeder. With just a few materials like PVC pipe, a lid, cement, and green spray paint, you can create a simple and efficient deer feeder.
Here are the steps to make your own PVC pipe deer feeder:
- Cut a 4-inch PVC pipe into sections of 12 inches each.
- Cut a 6-inch PVC pipe into sections of 6 inches each.
- Cut a 4-inch PVC pipe into sections of 3 inches each.
- Use cement to attach the 6-inch PVC pipe to the center of the 12-inch PVC pipe section.
- Attach the 3-inch PVC pipe section to the bottom of the 6-inch PVC pipe.
- Attach a cap to the top of the 12-inch PVC pipe section.
- Spray paint the feeder in a green color to blend in with the surroundings.
Once your PVC pipe deer feeder is complete, you can fill it with corn or other types of deer feed. Place it in a location where deer are known to frequent and enjoy watching them come to feed.
Build a Trough Style Deer Feeder
Building a trough-style deer feeder can be a simple and long-lasting solution for your feeding needs. This type of feeder allows free-choice feeding for deer and turkeys, without requiring any batteries or motors, which means less maintenance and fewer chances of failure. To build this feeder, you will need 4×6 and 4x4s, treated plywood measuring 24″ x 72″, 2×6 framing for the trough and roof, a 4′ x 8′ sheet of metal roofing, and a 2×10 center rafter. By using quality materials, you can ensure that your deer feeder will last for many years to come. Get started today and enjoy watching wildlife visit your feeder day and night!
Homemade 55-Gallon Gravity Deer Feeder
Looking for an inexpensive way to attract big bucks to your hunting property? Consider building your own homemade 55-gallon gravity deer feeder! With just a few simple steps, you can construct an effective corn feeder that will provide the necessary nutrition for deer and keep them healthy. Here’s what you’ll need:
- A 55-gallon drum
- A funnel
- A 2-inch PVC pipe
- A cap for the PVC pipe
- A 3/4-inch drill bit
- A bungee cord
Once you have gathered your materials, follow these steps:
- Drill a hole near the bottom of the drum using the 3/4-inch drill bit.
- Insert the PVC pipe into the hole and secure it with the cap.
- Attach the funnel to the top of the PVC pipe.
- Fill the drum with corn.
- Secure the bungee cord around the drum to keep animals from knocking it over.
With your homemade deer feeder set up, you’ll be able to easily attract prize-winning bucks to your hunting property. Give it a try and see the results for yourself!
Cheapest and Easiest DIY Deer Feeder
Looking for a quick and affordable way to feed the deer in your area? Look no further than this DIY deer feeder! With just a 5-gallon bucket and some store-bought parts, you can provide your furry forest friends with the nutrition they need. Plus, it’s cheaper than buying an already-made feeder. If you already have some of the parts, you can save even more money! Get started on building your deer feeder today for a hassle-free solution to feeding wildlife.
Make Your Own PVC Deer Feeder
Making your own deer feeder is an easy and budget-friendly way to attract deer to your hunting grounds. With just a few supplies, including PVC pipe, you can create a dependable and effective feeder in no time. Follow these simple steps to make your own PVC deer feeder:
- Cut a piece of PVC pipe to your desired length.
- Drill holes in the pipe for the feed to come out.
- Attach end caps to the pipe to keep the feed dry and secure.
- Hang the feeder in a desired location using a sturdy rope or chain.
Once your feeder is set up, fill it with your desired feed and wait for the deer to come to you. This DIY deer feeder is a great way to improve your hunting success and enjoy the outdoors.
Summary
Looking for DIY deer feeder ideas? You’ve come to the right place. There are plenty of options to choose from, whether you want to build a simple trough feeder or a more complex gravity feeder. Consider the materials you have on hand and your level of DIY expertise when selecting a design. With a little creativity and effort, you can provide a reliable source of food for the deer in your area.
